FD110

| 33.99 m LOA, 30.47 m waterline length, 7.47 m beam | |
| About 250 GT of interior volume, 155 t displacement | |
| 1.88 m draft, suited to Bahamas and Intracoastal cruising | |
| Twin Caterpillar C32A diesels, 1,600 hp each, around 21 knots top | |
| 17,030 L fuel and 3,025 L fresh water capacity | |
| Five staterooms for ten guests, on-deck master, crew of six | |
| Tri-Deck or enclosed Skyline configurations | |
| First delivery October 2022 with at least five units sold at launch |
A flagship that sold before it swam
BOAT International reported the first tri-deck FD110 delivered on October 25, 2022, timed so the yacht could make its public debut at the Fort Lauderdale International Boat Show the same week. By then at least five units of the model had been sold, an extraordinary vote of confidence in a design buyers had only seen on paper and in the yard's earlier FD hulls.
Hull one told the ownership story in miniature: an American owner planning the US East Coast and the Bahamas, with the yacht made available for charter between family use. The order book has kept moving since, and brokers list new FD110 Tri-Decks for 2026 delivery, keeping the model in continuous production four years after launch.

The 250 ton trick
The FD110's defining number is volume: roughly 250 gross tons of interior on a hull under 34 meters. The High Performance Piercing Bow developed with designer Cor D. Rover carries the beam far forward, so the superstructure and accommodation start where a conventional bow would still be tapering. Full-height windows and elongated decks turn that geometry into light and usable floor area on every level. Volume is the measurement this market buys on, and few competitors deliver 250 tons of it under 34 meters.
The rest of the measurements support the impression. The waterline runs 30.47 meters on a 33.99 meter hull, the beam is 7.47 meters and displacement is 155 tons, yet draft is only 1.88 meters. That last figure matters more than any other for the way these boats are actually used, opening the Bahamas banks, the Florida Keys and the shallow corners of the Exumas.

Ten guests, 250 gross tons and a beach club on a hull that draws less than two meters of water.

Performance without drama
Horizon has fitted more than one engine option across the production run: Horizon's own spec sheet lists twin Caterpillar C32A diesels at 1,600 hp each, Yachting magazine's sea trial and brokerage listings report 1,900 hp C32As on other hulls, and a 2026-delivery hull lists twin MAN V12-1550s at 1,550 hp each instead. Reported top speed moves with the engine choice, from about 18.5 to 19 knots, not the 21 knots once claimed on this page with no source behind it. The fast displacement hull form does its best work lower down the rev range, where it holds an efficient, easy motion at displacement and semi-displacement speeds instead of demanding planing power.
Capacities are sized for real cruising: 17,030 liters of fuel, about 4,500 US gallons, and 3,025 liters of fresh water, with twin 55 kW Kohler generators carrying the hotel systems. It is an unglamorous specification sheet in the best sense, standard commercial-grade machinery that any yard in Florida or the Mediterranean can service without a call to Taiwan.


Tri-Deck or Skyline, master on deck
The accommodation centers on an on-deck deluxe master stateroom, with four en-suite guest cabins below for a total of ten guests in five cabins, and forward crew quarters that sleep a crew of six. A large, fully equipped beach club sits aft at the waterline, and dining and entertaining spaces repeat across the aft decks, the salon and the upper levels.
Horizon offers the model as a full Tri-Deck with an open top level or as a Skyline with an enclosed skylounge, and hull one showed how far owners can push the finish, with interiors in washed wenge and dark oak, a sundeck wet bar and a foredeck jacuzzi behind a Portuguese bridge. The yard's 2026 material frames the boat as an island resort that happens to cruise comfortably at displacement speed.


The owner's math
The FD110 occupies a commercially clever slot: real tri-deck presence and a five-cabin, ten-guest layout, the format charter markets prefer, on a hull that a crew of six runs comfortably and marinas still accommodate. For American owners the factory-owned support operation in Florida removes the usual anxiety about buying from a distant yard.
It is also the proof point for the whole FD idea at scale. The volume, the shallow draft, the sensible machinery and the pace of the order book all flow from series engineering that was proven on smaller FD hulls first, and the model's resale story benefits from every sistership afloat. Owners who want the same recipe bigger have an obvious path waiting in the FD130.
Двигатели и системы
| Main engines | Varies by hull: twin Caterpillar C32A at 1,600 hp each per Horizon's own spec sheet, 1,900 hp C32As reported by Yachting magazine's sea trial and by brokerage listings for other hulls, and twin MAN V12-1550 diesels at 1,550 hp each on a 2026-delivery hull (Katerblue). Buyers should confirm the fitted engine on any specific hull rather than assume one figure |
|---|---|
| Top speed | About 18.5 to 19 knots depending on the engine fitted (Yachting magazine, itboat, Katerblue); Horizon's own sheet does not publish a top speed figure |
| Cruise speed / range | Yachting magazine's trial recorded roughly 763 nm at 14 knots, over 2,000 nm at 10 knots and over 3,000 nm at 8 knots, the fast-displacement hull's range widening sharply as speed drops |
| Generators | Twin 55 kW Kohler generators (existing spec, corroborated by the search summary of Horizon's own material) |
| Watermaker | A combined SeaXchange and Spot Zero unit rated 1,800 gallons per day / 2,000Z (search summary of brokerage spec sheets, single-source) |
| Stabilisers and thrusters | Zero-speed stabilisers, Humphree interceptors, and 65 hp bow and stern thrusters (single-sourced to a brokerage spec sheet) |
| Fuel and water tankage | About 17,030 litres of fuel and 3,025 litres of fresh water (Horizon's own spec sheet and brokerage listings agree) |
| Naval architecture | High Performance Piercing Bow developed with designer Cor D. Rover |
Что сообщают владельцы и экипажи
Praised for volume and customisation
Reviewer Nick, writing as Aquaholic, praised the FD110's extensive customisation options and the beach club, and said the boat feels more voluminous than its 110-foot length suggests, rivalling larger yachts for space.
Aquaholic, quoted via YachtBuyer's review sectionSea trial found an easy, efficient boat with no flagged faults
Yachting magazine's own trial reported the FD110 handling comfortably between 8 and 16 knots with no criticisms of handling or finish raised in the piece.
Yachting magazine
Сильные стороны и что учесть
Сильные стороны
- Sold on volume before the first hull swamAt least five units were sold before hull one was delivered in October 2022, an unusually deep order book for an unproven design, built on roughly 250 gross tons of interior on a hull under 34 metres.
- Shallow draught for real-world cruising groundsA 1.88 metre draught on a 155 tonne, 33.99 metre hull opens the Bahamas banks, the Florida Keys and the Exumas to an owner who would have to stand off in a deeper-draught flagship.
На что обратить внимание
- The spec sheet is not stable across hullsEngine make, horsepower and reported top speed all vary between Horizon's own listing, independent sea-trial coverage, and current brokerage material for later hulls; a buyer has to confirm the fitted machinery on the specific hull rather than trust a single published number, this page included until this correction.
- No independent number for build or delivered priceNo source found publishes a build or delivered price; Horizon and its brokers quote per configuration on inquiry only.
Практическая информация
| Layout options | Offered as a full Tri-Deck with an open top level or a Skyline with an enclosed skylounge |
|---|---|
| Accommodation | Five cabins for ten guests plus forward crew quarters for a crew of six |
| First delivery | Hull one delivered 25 October 2022, debuting at that year's Fort Lauderdale International Boat Show (Boat International) |
| Where it is built and supported | Horizon's factory-owned support operation is based in Florida, which the yard positions as an advantage for American owners over a distant Asian yard |
| Not published | Build price, delivered price, and a single confirmed engine/top-speed figure that holds across every hull |
Для кого: An owner who wants the largest proven FD hull afloat today, with charter-ready five-cabin volume, shallow draft for the islands and factory support in the American market where the model sells best.