20 November 2026 · Yotters, independent yacht media
Yotters
Designers & Studios

Laurent Giles Naval Architects

Laurent Giles drew the 25 foot Vertue that Humphrey Barton sailed across the Atlantic in 1950, the 30 foot Wanderer III that took the Hiscocks round the world and Myth of Malham, which won the Fastnet twice. Founded in Lymington in 1927, the office now does naval architecture for 70 metre motor yachts. Here is what it built, what the boats cost now and what to check before you buy one.
Peter Duck, the 28 foot Bermudan ketch Laurent Giles drew for Arthur Ransome in 1945, on her mooring at Woodbridge on the River Deben.
Peter Duck, the 28 foot Bermudan ketch Laurent Giles drew for Arthur Ransome in 1945, on her mooring at Woodbridge on the River Deben.Photo: Chris Holifield / Wikimedia Commons (CC BY-SA 2.0)
FounderJack Laurent Giles (1901 to 1969), Cambridge graduate, Royal Designer for Industry 1951
FoundedLymington, 1927; now at the Brockenhurst Business Centre, Hampshire
Company namesLaurent Giles and Partners (1927 to 1979), Laurent Giles Ltd (1979 to 1987), Laurent Giles Naval Architects Ltd (since 1987)
Designsmore than 1,400 (firm and Wikipedia)
Directors named in 2017David Lewis (managing) and Stephen Wallis (technical)
Vertue25 ft 3 in cutter, first boat Andrillot (1935 or 1936), around 200 built
Vertue XXXVBarton and O'Riordan, westward Atlantic crossing 1950, 47 days by the Ocean Cruising Club's count
Wanderer III30 ft, built by William King at Burnham-on-Crouch, launched 1952; Hiscock circumnavigation 1952 to 1955
Myth of Malham37 ft 6 in, 1947, Fastnet winner 1947 and 1949
Gulvain55 ft, launched 1949, first aluminium alloy ocean racer
Westerly Centaur26 ft bilge keeler, 1969, 2,444 built
Recent naval architectureSamar 77 m (Devonport, 2006), Stella Maris 72.1 m (VSY), Robert C. Seamans brigantine (J.M. Martinac, 2001), Wally WHY200 27 m, Drako 38 m (Alpha Custom Yachts, 2022)
Design fee and lead timenot published

A Lymington Office With 1,400 Designs Behind It

Jack Laurent Giles was born in 1901 and died in 1969. He read at Cambridge, set up on his own in Lymington and was made a Royal Designer for Industry in 1951. The firm has traded under three names: Laurent Giles and Partners from 1927 to 1979, Laurent Giles Ltd until 1987 and Laurent Giles Naval Architects Ltd since. Its own count is more than 1,400 designs, and Wikipedia gives the same figure. It never built boats itself. Every hull on this page came from an outside yard, which matters when you are buying one, because the build quality belongs to the yard and the drawings belong to Giles.

The office has moved inland. Its current address is a unit at the Brockenhurst Business Centre in the New Forest, a few miles up the road from Lymington. Boat International's 90th anniversary piece in 2017 named David Lewis as managing director and Stephen Wallis as technical director, and both still appear as directors on the UK company register. The work it lists now is naval architecture and yacht design, consultancy on class, flag and stability work, plus refit design and engineering. That's a long way from a 25 foot cutter, and a buyer of a classic Giles boat should know the modern office is mostly a superyacht engineering practice that also holds a famous name.

The Vertue: 25 Feet That Made the Name

Andrillot was drawn for a Guernsey solicitor, Dick Kinnersly; Yachting World dates her to 1935 and most other accounts to 1936. The class only got its name after the war. In 1939 the boat Epeneta won the Little Ship Club's Vertue Cup for a 745 mile Channel cruise, and Giles named the design after that cup. Humphrey Barton had already sailed Andrillot 855 miles in 23 days in 1937, which earned him the Royal Cruising Club's Founder's Cup. Early boats were gaff rigged and most have since been converted to Bermudan, Andrillot among them, though her current German owner wants to put her back to gaff.

How many exist? Wikipedia reads the sail numbers, which run to about 230, as roughly 200 boats, and Yachting World says around 200 too, with plans for hull 249 already sent out. The glassfibre Vertue II, six inches beamier at 7 foot 10 inches, was built by Westerly and later by Bossoms in Oxford. Yachting World puts the glassfibre boats at more than 40 and Wikipedia at about 30 since the 1970s, so treat that count as loose. Wooden Vertues are still being built from the drawings. For an owner that means two different boats under one name: a wooden one needs a wooden-boat survey and the glassfibre one needs an ordinary glassfibre survey.

The 77 metre motor yacht Samar, built by Devonport with Laurent Giles naval architecture, under way off Lorient in August 2006.
The 77 metre motor yacht Samar, built by Devonport with Laurent Giles naval architecture, under way off Lorient in August 2006.Photo: Pline / Wikimedia Commons (CC BY-SA 3.0)
You can only go so far with CFD - tank testing is the real basis of hull design.

Small Boats on Big Oceans: Vertue XXXV and Wanderer III

Barton and Kevin O'Riordan sailed Vertue XXXV westward across the North Atlantic in 1950. The Ocean Cruising Club and Kirkus Reviews both give the passage as 47 days, though a 1950 newspaper report had her 52 days out from Falmouth and a forum reader of Barton's book counts 46, so the exact figure depends on where you start the clock. South of Bermuda she was knocked down, her doghouse windows were smashed in and the cabin flooded. Barton wrote it up as Vertue XXXV, published in the US as Westward Crossing, and in 1954 he founded the Ocean Cruising Club and became its first Commodore.

Wanderer III is design number 0164, drawn in 1951 as a larger Vertue and built by William King at Burnham-on-Crouch. She was launched in 1952 and the Hiscocks sailed her round the world from July 1952 to July 1955, which won them the Cruising Club of America's Blue Water Medal. Yacht magazine records about 110,000 miles under the Hiscocks and more than 300,000 in all. Thies Matzen has owned her since the early 1980s and won the same medal in 2011. She has survived two strandings on reefs, a capsize and broken frames in the Southern Ocean, and needed more than a year of rebuilding in New Zealand with new frames and new copper sheathing. Hiscock called her the smallest boat a sensible sailor would cross an ocean in, and later wanted something wider because she rolled hard.

The steel brigantine Robert C. Seamans, drawn by Laurent Giles for the Sea Education Association and launched in 2001, alongside in Honolulu.
The steel brigantine Robert C. Seamans, drawn by Laurent Giles for the Sea Education Association and launched in 2001, alongside in Honolulu.Photo: Stan Shebs / Wikimedia Commons (CC BY-SA 3.0)

Myth of Malham and the Light Displacement Racers

Illingworth, a Royal Navy officer and later Commodore of the Royal Ocean Racing Club, wanted a boat to go flat out for the Fastnet. Giles described the brief as minimum size, light displacement, no sheer, no doghouse and very short overhangs, and Illingworth insisted the ends be cut off at the waterline. The design also worked the rating rule hard, with a masthead rig that gave free headsail area. Yachting World lists her at 11.47 metres with six berths, and the Laurent Giles archive names the builder as Hugh McLean and Sons on the Clyde. The boat looked odd in 1947 and won anyway, and the short-ended light boat became the normal offshore racer.

The same line ran into metal. Gulvain, a 55 foot sloop for Jack Rawlings launched on 27 June 1949 at Shoreham, was built in Birmabright aluminium alloy, and Wikipedia and Boat International both call her the first aluminium ocean racer. She had rod rigging and a mast extruded in three lengths and riveted together. The aluminium was chosen for strength, not lightness, since she still displaced around 16.5 tons. If you are looking at a Giles racer of this period, these are the ideas you are buying into: short ends, a long waterline for the length and early experiments in materials that later became normal.

Robert C. Seamans at Queens Wharf in March 2018, her square yards and furled topsails over a wet quay.
Robert C. Seamans at Queens Wharf in March 2018, her square yards and furled topsails over a wet quay.Photo: US Embassy from New Zealand / Wikimedia Commons (CC BY 2.0)

Production Boats: Peter Duck, the Centaur and Westerly

Peter Duck is a 28 foot Bermudan ketch that Giles drew in late 1945 for Arthur Ransome, who wanted something lighter than his previous boat. Harry King's yard at Pin Mill started building her in January 1946, and she was finished in 1946 or 1947 depending on the source. Ransome called her his marine bath chair. The design turned into a class of a few dozen boats built mostly by Porter and Haylett at Wroxham over about twenty years, and the original is back at Woodbridge on the Deben with owners Julia Jones and Francis Wheen, who have had her since 1999.

The Centaur was the last design Jack Giles worked on. Both the Laurent Giles archive and Classic Sailor give the official build as 2,444 boats, and Classic Sailor notes sail numbers running to 2,507, so a few more probably exist. She is 26 feet overall, 8 feet 5 inches in beam, draws 3 feet on cast iron bilge keels and displaces about 6,700 pounds. The archive says she was tank tested before a prototype was built, which it believes was a first for a mass production yacht. The office kept working with Westerly and with Moody into the early 1980s, so some British production glassfibre of that era carries Giles lines under a builder's badge.

What the Modern Firm Delivers

Samar is a 77 metre motor yacht delivered by Devonport in the UK in 2006, listed on both the firm's own site and Boat International's directory. Stella Maris, 72.1 metres, was built by Viareggio Superyachts, with naval architecture by Laurent Giles and exterior design by Espen Oeino; Superyacht Times reported her launch in 2012 and Boat International lists her as 2013. The office also drew the steel brigantine Robert C. Seamans for the Sea Education Association, built by J.M. Martinac in Tacoma and launched in 2001 for sail training and ocean research. The firm's site shows a 64 metre VSY project, Duchess of Tuscany, on which it is consulting naval architect, with the stern lengthened by 2.5 metres and a bulbous bow added.

The newer work is with builders that use outside naval architects. Wally's 27 metre WHY200 has a Laurent Giles hull, tank tested at Solent University in Southampton, with interiors by A. Vallicelli and Ferretti engineering. Alpha Custom Yachts' 38 metre Drako, delivered in 2022, has Laurent Giles naval architecture and H2 Yacht Design styling, according to both H2 and Boat International. The office also publishes two 110 metre concepts, the four-masted Atlas and the HEMY motor yacht kept just under 3,000 gross tons so that it needs no lifeboats. David Lewis told Boat International that CFD only goes so far and tank testing is the real basis of hull design, which tells a client how the office will want to spend part of the budget.

Costs, Used Boats and What Isn't Published

No fee schedule appears on the firm's site or in any interview read for this page, and the same goes for refit engineering rates and how long a brief takes to turn into drawings. On the used side the listings are specific. Yachtall has a 1963 Vertue, V118, at 12,500 euros including VAT. Rightboat carries the 1952 Vertue No 47, refitted by a shipwright in 2021, at the equivalent of about 20,400 dollars through David Morris in Walton-on-the-Naze. Wooden Ships lists the 1951 boat V40 with a November 2022 survey valuation of 22,000 pounds. Yachting World says Andrillot's current owner paid less than the price of a new Volkswagen Golf for her in 2020. These are asking prices and one valuation, not sale prices.

On a wooden Giles boat, check frames, fastenings and the mast before anything else. Andrillot was described as in very good condition after a three-year restoration, and a surveyor then condemned her mast for a crack, so a new one had to be made before her 2020 relaunch. Many Vertues carry a small Yanmar 1GM10, so ask for its service history. On a Centaur, owners on the Yachting and Boating World forums point at the keel stubs rather than the bolts, report weeping at the keel bolts even after reinforcement and say many boats went back to Westerly for keel root strengthening. Look for glassed-in webs inside and check the bilge keel attachments and chainplates for cracks. Ask about osmosis and a wet stern gland too. Wanting a classic built new? The firm doesn't publish prices for that either, so get the yard's quote and the office's quote separately.

Practical detail

Design feenot published; no plan price, hourly rate or percentage appears on the firm's site or in the press read for this page
Used Vertue pricesadvertised examples: 1963 V118 at 12,500 euros incl. VAT (Yachtall), 1952 No 47 at about 20,400 dollars (Rightboat), 1951 V40 surveyed at 22,000 pounds in November 2022 (Wooden Ships); asking prices, not sales
WhereUnits 110 to 112, Brockenhurst Business Centre, Grigg Lane, Brockenhurst, Hampshire; the firm was founded in Lymington
Servicesnaval architecture, yacht design, class, flag and stability consultancy, inclining trials, refit design and engineering
Yards it has worked withDevonport (Samar), Viareggio Superyachts (Stella Maris), J.M. Martinac (Robert C. Seamans), Wally and Ferretti (WHY200), Alpha Custom Yachts (Drako); historically William King, Harry King, Westerly and Moody
What to check on a used Giles boatwooden boats: frames, fastenings, mast and engine history; Centaur: keel stubs and internal webs, keel bolt weeping, bilge keel attachments, chainplates, osmosis, stern gland
What is not publisheddesign fees, lead time for a commission, restoration costs for the classic boats and any sale prices as opposed to asking prices
AlternativesSparkman and Stephens for classic offshore designs; Dykstra Naval Architects and Hoek Design for classic-style sailing yachts; for motor yacht naval architecture, Van Oossanen and other engineering offices

What owners and crew report

What is good, and what to watch

Strong points

  • A proven offshore record in small boatsVertue XXXV across the Atlantic in 1950, Wanderer III round the world from 1952 and past 300,000 miles, Myth of Malham two Fastnet wins
  • Designs that sold in real numbers2,444 Centaurs and around 200 Vertues, so parts knowledge, owner groups and used boats are easy to find
  • A working office, more than an archivecurrent naval architecture for Devonport, VSY, Wally and Alpha Custom Yachts, with tank testing as standard practice

What to watch

  • No published fees or lead timesnothing on the site or in the press gives a design fee, a plan price or how long a commission takes
  • Most famous boats are old wooden onesa 1950s Vertue or Peter Duck brings frames, fastenings and rig work, and Andrillot needed a new mast straight after a full restoration
  • The Centaur's keel historyowner forums describe keel stub weakness and weeping bolts, so a survey has to look inside the hull
  • The modern office is a superyacht practiceits listed services are naval architecture, consultancy and refit engineering, so a small classic owner should ask directly what help is available

Who it is for: Two kinds of client. Owners and buyers of classic Giles boats, from a Vertue or Centaur to a Peter Duck, who want the original designer's drawings and judgement; and yards and owners of large motor yachts and specialist vessels who need an independent naval architect with tank-testing habits.

Profile compiled by Yotters from public sources.
Yotters DeskEditor-in-Chief: Leon SolimanEditorial standards
Reported from primary sources: Boat International, Yachting World, Yacht, Classic Sailor, Ocean Cruising Club, Cruising Club of America, Kirkus Reviews, Wikipedia, Superyacht Times, Yachting and Boating World forums, Wooden Ships, Laurent Giles Archive, Rightboat, Yachtall, H2 Yacht Design.

More in Designers

Designers

Winch Design

Designers

Nuvolari Lenard

Designers

RWD (Redman Whiteley Dixon)

Partner with Yotters

Design studios and naval architects belong on Yotters.

List your brand, claim your profile, or plan a campaign with the desk that owners, brokers and builders read first.

I am interested in Designers

The Yotters Brief

The yacht world, read every morning.

The stories that move the yacht world, before the market does. Join the owners, brokers and builders who start the day with Yotters.