Verdier Yacht Design

| Guillaume Verdier, born 28 September 1970, French; BSc Southampton Institute 1990-93, MSc Southampton 1994-95 | |
| Finot office 1997 to 2001; own office founded 2001, first design the Hydraplaneur for Yves Parlier | |
| Honorary doctorate from Solent University in 2016 (Wikipedia) | |
| America's Cup | Areva Challenge 2004-07, Team New Zealand from 2010; won 2017 (7-1) and 2021 (7-3) |
|---|---|
| Apivia IMOCA | CDK Technologies, launched 5 August 2019, second in the 2020-21 Vendee Globe after redress |
| Macif Sante Prevoyance | launched June 2023, 2024-25 Vendee Globe won in 64 d 19 h 22 min 49 s, a record |
| Comanche | 30.45 m, Hodgdon Yachts, 2014; held the monohull 24-hour record of 618 nm from 2015 to 2023 |
| Gitana 17 | 32 m by 23 m foiling Ultim, 2017; won the 2024 Arkea Ultim Challenge in 50 d 19 h 7 min |
| Gitana 18 | 32 m by 23 m, first flew late May 2026, retired from the November 2026 Route du Rhum |
| Shipman 63 | 19.20 m carbon cruiser drawn with Michel Desjoyeaux |
| Office | project-based network of about 13 named collaborators plus PURE and Matrix in New Zealand; no address published |
| Design fees and lead times | not published |
A Southampton Engineer Who Wanted No Boss
Wikipedia gives his birth date and his path through Southampton: a BSc in yacht and small craft design from 1990 to 1993 at what is now Southampton Solent University, then a master's in naval architecture at the University of Southampton in 1994-95. His own career page adds a year in the naval architecture research department of the University of Copenhagen in 1996-97, where he worked on wave impact on hulls, composite optimisation and a structural calculation program called MADSYS. He then joined the Finot office, where by his own list he worked on a run of Open 60s: Fila, Groupe 4, Gartmore, Somewhere, Sodebo, Temenos and PRB, the boat Michel Desjoyeaux took to victory in the 2000-01 Vendee Globe.
He left in 2001 and started alone. The first job was the Hydraplaneur for Yves Parlier, drawn with Romaric Neyhousser, who still works with him. Solent gave him an honorary doctorate in 2016 according to Wikipedia, and a Sailing Scuttlebutt profile written about a year later describes the honorary degree as recent. Sources disagree slightly on how long he stayed at Finot: his bio runs 1997 to 2001, while a 2025 YACHT profile says five years. YACHT also reports his reason for leaving, that he wanted neither a boss nor to be one, which explains the shape of the office described below.

An Office With No Permanent Staff
The studio's own co-workers page names a core of three people he met at the Aquitaine Design Team in 2001: Benjamin Muyl, Herve Penfornis and Romaric Neyhousser. It adds ten more names covering performance prediction, fluid dynamics, appendage design, structures, stability and simulator work and two outside partners in Auckland, PURE Design and Engineering for structures and Matrix for advanced analysis. The page says he calls on each person's skills whenever a project needs them. The site gives between 5 and 12 people on a given project, a figure the page itself describes only loosely.
What isn't published is just as telling. The studio gives no street address, no total headcount and no price list and the site names the practice Guillaume Verdier Architecture Navale, not a trading brand, so for a client the contract is with the man and his network. That's a strength if you want his judgement on your boat and a risk if you need an office that carries on without him. YACHT describes him as working with a trusted circle of friends and colleagues who also run their own projects. If you're commissioning, ask in writing who does the drawing, who checks the structure and who answers the phone in year three.

He has said he wanted neither a boss nor to be one, and the office is built that way.

Four America's Cup Campaigns With Team New Zealand
He entered the Cup in 2004 on the French side: his site says Areva Challenge hired him for its concept design, and the boat raced in Valencia in 2007. In the same period his career page lists work on TNZ 57 and TNZ 60 for the K Challenge. He joined Emirates Team New Zealand in 2010 (Wikipedia and Le Petit Journal both say so) to design the AC72 for the 2013 match, which New Zealand lost to Oracle. His office describes its part in later campaigns as assisting with the AC72, the AC50 and the AC75 and the 2021 work was done with his own team of between 5 and 12 people.
Credit is where sources differ. A 2017 Sailing Scuttlebutt profile calls him the man mostly responsible for the new monohull concept and says a 39 foot foiling boat he had already drawn for a New Zealand client gave the team a head start, while Team New Zealand's own design coordinator at the time was Dan Bernasconi, so the work was shared and no source splits it precisely. The results themselves are firm: 7-1 over Oracle Team USA in Bermuda in 2017 and 7-3 over Luna Rossa in Auckland in 2021, with Te Rehutai winning the last race by 46 seconds. YACHT's 2025 portrait quotes his view that four campaigns were enough.

IMOCA 60s: From Safran to the Record Vendee Globe
His first IMOCAs under his own name were drawn in 2006-07 with VPLP, Groupe Bel for Kito de Pavant and Safran for Marc Guillemot, and YACHT calls Safran one of his best. The big step was Apivia, built by CDK Technologies in Lorient and launched on 5 August 2019 for Charlie Dalin, a naval architect himself. In the 2020-21 Vendee Globe she crossed the line first but was ranked second after the jury gave time redress to other skippers, which Wikipedia records. She later raced on as L'Occitane en Provence and finished 11th of 40 in 2024-25 under Clarisse Cremer.
Macif Sante Prevoyance followed, launched in June 2023. Yachting World says it took a team of 50 people 20 months and 60,000 hours, and describes a narrower stern, the maximum beam carried further forward, more rocker and a gull-wing deck that Dalin says is stiffer and needs less carbon. Verdier's own site claims 10 to 12 per cent less drag than Apivia, a team figure that no independent test has confirmed. Dalin covered 27,668 miles at 17.79 knots, beating Armel Le Cleach's 2016-17 time of 74 days, 3 hours, 35 minutes and 46 seconds. Verdier himself criticises the class ban on T-foils on rudders and expects Open 60s to fly in the end.


Comanche, Gitana 17 and Gitana 18
Comanche was drawn with VPLP: Sailing Scuttlebutt's designer notes list Verdier's team and the VPLP team together and say it was built by Hodgdon Yachts in Maine, 30.45 m long, with a 6.80 m draught and under 30 tonnes displacement, though Wikipedia gives 31,000 kg and 7.85 m beam against the notes' approximate 8 m. She held the monohull 24-hour record of 618 nautical miles from July 2015 until May 2023, set a transatlantic record of 5 days, 14 hours and 21 minutes in 2016 and took line honours in the 2015 Sydney to Hobart. The sources disagree on her length in feet, so we use the metric figure.
Gitana 17, called Maxi Edmond de Rothschild in racing, was launched in 2017 as a 32 m by 23 m foiler. Multihulls World reports a laden weight of 15.5 tonnes, a build of about 20 months and a cost of about 15 million euros, and notes that the automatic flight control cannot be used in racing. Charles Caudrelier won the 2024 Arkea Ultim Challenge on her in 50 days, 19 hours and 7 minutes, reports differing by a few seconds. Gitana 18 has the same 32 by 23 m footprint, weighs about 19.5 tonnes and first flew in late May 2026 in 10 to 13 knots, says YACHT. Boat International says it uses Y-shaped foils and expects a 10 to 15 per cent gain on Gitana 17. It then retired from the Route du Rhum in November 2026, with reports citing major damage to a foil, which we couldn't confirm from a primary source.


Cruisers, Production Boats and What Isn't Published
His career page lists the Shipman 63 as a fast carbon cruiser drawn with Michel Desjoyeaux, who shaped the cockpit and navigation area for short-handed sailing, and a Lansart 47 ocean cruiser with two units under construction at the time. J&J Design's case study confirms Verdier's involvement and gives the Shipman prepreg carbon-epoxy construction, a cutter rig and a lifting bulb keel and says it won the 2006 European Boat of the Year title. A boat-specs database says his office's production designs were built by Pogo Structures and Jeanneau but names no models, so we don't. YACHT reports that his personal favourite is the 60 foot ketch Eole.
For an owner the practical message is that Verdier is a specialist in speed. The 2017 Scuttlebutt profile ends by hoping he'll apply his talent to faster performance cruisers, which is an invitation, not a record. Nothing public gives a design fee, a percentage of build cost, a lead time or a client list beyond the headline racing programmes, and YACHT says several new Vendee Globe designs for 2028 are in hand, including one for Sebastien Simon, which suggests the diary is full. A one-off cruising commission will need a direct conversation and written scope, and you should price the build separately, because the builder (CDK, Multiplast or Hodgdon at the top end) decides the real cost.
Informazioni pratiche
| Design fee | not published; no price list on the studio's site, November 2026 |
|---|---|
| Where | not stated; YACHT reports no permanent office or employees, and the site names collaborators in France and New Zealand |
| Team | about 13 named collaborators plus PURE (Auckland) and Matrix; 5 to 12 people on a given project, per the studio |
| Typical builders | CDK Technologies (Lorient) for IMOCA and Gitana 18, Multiplast for Gitana 17, Hodgdon Yachts (Maine) for Comanche |
| Reference build cost | Gitana 17 about 15 million euros over about 20 months (Multihulls World); Macif IMOCA 20 months and 60,000 hours of design (Yachting World) |
| Classes drawn | America's Cup, Ultim, IMOCA 60, Class40, Mini 6.50, multihull appendages, dinghies, IRC and cruising |
| What is not published | fees, lead time, headcount, address, a full list of production models and a verified build count |
| Alternatives | VPLP Design, which is listed separately on this site and has co-designed boats with Verdier, and the larger Finot-Conq lineage for Open 60s |
Cosa riferiscono armatori ed equipaggi
Gitana 18 learnt to fly far faster than Gitana 17
Team director Cyril Dardashti said the team reached stable flight in under 30 minutes, against almost two years for Gitana 17 and skipper Charles Caudrelier said the flight was stable after about 20 minutes
YACHTGitana 17 is physically demanding
a magazine sail aboard found that flying needs constant fine adjustment, that the automatic flight program is not allowed in racing and that sail and winch work is hard
Multihulls WorldDalin helped specify his own boat
Charlie Dalin, a trained naval architect, took part in all areas of Macif Sante Prevoyance, including a gull-wing deck he says is stiffer and needs less carbon, and a living area of about 5 square metres aft
Yachting WorldGitana 18 retired from its first major race
it left the 2026 Route du Rhum with major damage, reported as foil damage and returned to Lorient
YACHT and Figaro Nautisme
Cosa convince e cosa va valutato
Punti di forza
- A winning record across three classesAmerica's Cup 2017 and 2021 with Team New Zealand, the 2024-25 Vendee Globe and the 2024 Arkea Ultim Challenge
- Small team, direct accessthe client deals with the architect and a small trusted group, with named specialists in structures and fluid dynamics
- Willing to push the rulesGitana 18 moves to Y-shaped foils, and he argues openly for T-foil rudders in the IMOCA class
Da valutare
- Prototype riskGitana 18 retired from the November 2026 Route du Rhum with major damage, and Gitana 17 needed almost two years to fly reliably
- No visible officeno address, headcount or fee schedule is published, so continuity and support after launch must be agreed in a contract
- Credit is sharedComanche is credited to VPLP and Verdier, and the Team New Zealand boats were a team effort, so you can't attribute a result to one person
- Little cruising workthe public record is almost all racing; the Shipman 63 and Lansart 47 are listed but with few details
A chi si rivolge: Racing teams, sponsors and owners who want a foiling or offshore racing boat drawn by the designer behind recent Cup, Vendee Globe and Ultim winners and sailors who want to understand what stands behind the names Macif, Gitana and Comanche.